Cleaning the clean pure water filter is one of the vital things you need to do to safeguard the flow of purified and safe-to-drink water. Needless to say, performing it right is of great significance for your family’s health.

This article would display you the hassle-way allowed to clean your PUR filter, whether you have a dispenser, faucet mount, or a refrigerator filter or backpacking.

How to Clean a Pure Water Filter?

No matter what type of filter you keep, before you fix it on your faucet or exclusive the dispenser or pitcher, it is highly acclaimed to clean it first. Dispenser manufacturers recommends doing this so you can make your water filter even more real at purifying your water.

But do not worry. You do not need to buy unusual equipment for this drive. Cleaning the filter could not be simpler.

Follow these steps for clear and clean filter:

Step 1: If you already have an ancient filter that has been used for 3 months, substitute with a new one. Here is the list of my favorite pure water filters for your information. While sometimes it is helpful for you to clean the timeworn filter to fix some issues such as glitches with the light, etc.), the old filter must be disposed of after 2-3 months (or less if you use it extremely often or live in an area where the water issuper polluted).

Step 2: You place the new filter in a glass and fill with water. Then pour white vinegar that is equivalent to 1/3 of the amount of water.  The solution would go a few inches over the filter. But  make sure that the filter is completely flooded.

Step 3: In order to it cleaned thoroughly, the filter must be saturated for at least 5 minutes.

Step 4: Then Eliminate the filter from the water and run cold water directly over the filter’s top for at least 10-15 seconds.

Step 5: Let the filter dry with before reinstalling it on your faucet or inside the pitcher.

How Do We Clean a Faucet-Mounted Pure water filter?

If you and your family are enjoying clean water thanks to the industrial faucet filter, it may seem that cleaning the filter is rather a more complicated process. But even though there are surely more parts involved here than that of a pitcher, the scrubbing process is just as simple.

When substituting the filter or cleaning the debris from an old one, it is significant to know that simply inserting the clean filter into its canister would not ensure purified water. If you have a faucet filter you must know how to clean the canister as well.

All right, let’s get your hands dirty. Follow these steps:

Step 1: First things first twist the cover off and eliminate the filter from the canister.

Step 2: If it is old, throw it away. Get the new filter and clean it properly, following above guidelines of how to clean pure water filter.

Step 3: Meanwhile, clean the canister thoroughly. Be careful to use something that is food and water safe for this drive, and ensure that no dangerous chemicals involved.

You may go with mild dish soap, but I suggest vinegar instead.  Soak the canister in a bowl filled with 1 cup of vinegar and 3 cups of water for at least 3 minutes.

Step 4: Run cold water through it and get rid of any frit or wreckage with a sponge.

Step 5: Install the filter and container onto your faucet. Run water for 5 minutes before drinking.

How to Clean a Pure water filter Dispenser?

The filter dispenser is not only reasonable, but it is also super suitable. It can be easily stored in your fridge and let you to drink cold and cleansed water anytime. However, there is one disadvantage to this useful appliance that it is prone to bacterial growth.

The upper part of the dispenser saves the dirty water. However, over a sure time period, the bacteria present in the tap water can mound up inside your dispenser. That is why regular spring-cleaning of the entire dispenser is highly optional.

Step 1: Eliminate the old filter from the dispenser. Clean the new pure water filter above guidelines of How to Clean a Pure water filter. Take the upper blue part of the dispenser off.

Step 2: Make a spring-cleaning solution. You can either choose vinegar or bleach for this purpose. If using vinegar, use 3 parts of water and 1 part of white vinegar. If you are concerned about the smell of the vinegar, add 1-2 tablespoons of lemon juice to counteract the smell. If you want a more real cleaning solution, mix a gallon (3.7 liters) of water with 2 to 3 teaspoons of bleach.

Step 3: Immerse a sponge into the spring-cleaning solution and clean the two parts of the dispenser (the blue part where you seal the tap water and the other one where the filtered water goes).

After wiping the dispenser, let it sit for about 2 minutes, but no lengthier than five.  The vinegar or bleach would disinfect and kill any bacteria.

Step 4: Dye well with clean water.

Step 5: Supplement the filter and fill the dispenser with water. Filter the water and get rid of it. Fill it once again. The water is now safe to drink.

Backpacking Water Filter Cleaning

The backpacking filter has been a lifeguard for hikers. If you are an outside person and love to spend time in nature, then cleaning this filter is something that you essential to do regularly.

Step 1: Separate the glass fiber element and see if it needs to be replaced. If it wastes to pump then you must probably buy a new one. If it still works, then a good spring-cleaning would do.

Step 2: Eliminate the handle of the pump and grease the O-ring with some silicone lubricant.

Step 3: Sanitary the main housing with water mixed with vinegar and let it sit for 2-3 minutes. Make sure to check the valve as grime and grit are known to get impacted inside it.

Step 4: Reconvene the filter. Pump water-and-vinegar mix through the filter if cleaning an old one, or use the rules of How to Clean a Pure water filter if it is a new filter. Let it air dry.

How to Clean a Refrigerator Water Filter?

Usually found in the refrigerator’s base grill, the refrigerator ice and water filters allow you to get rid of most of the pollutants from your fridge.

But although they are strong and firm for about 6 months, it is important to clean them regularly to guarantee proper purification.

Now, let’s get down to the business. Follow these steps of how to clean a refrigerator water filter.

Step 1: Eliminate the filter from your refrigerator and blow it over a bin to get rid of the piled up dirt and excess debris.

Step 2: Make a spring-cleaning solution of water and vinegar and plunge the filter completely in it.

Alternatively, you can choose to immerse it in a solution made of bleach (1 gallon or 3.7 liters of water mixed with 1-2 teaspoons bleach) or a spring-cleaning mixture made of water and dish soap.

Let it immerse for 5 minutes (if using bleach, 2 minutes are enough).

Step 3: Rinse well and run water through it for a few minutes. And be ensuring not to use hard water pressure to avoid damaging the filter.

Step 4: Let it air dry before assertive it back into place.


Bottom Line

Indeed, cleaning the pure water filter as well as its cover is an important step to fine water purification. A proper cleaning does not only disinfect and Remove piled up contaminants, but also recovers the water flow and prevents clogging.

I clean my filter once a week to keep those pollutants away from my glass. So I suggest you do the same.

Now if you have any dilemmas with a pure water filter, check out how to troubleshoot pure water filter problems.

Frequently Asked Questions

How can I recycle my used products?

Each respective product website is currently working on applying a recycling program for customers.  Please continue to check this section as we will provide an update once details become available.

How can I assemble my unit?

1- Immerse the filter in cold water for 15 minutes.

2- Hand wash pitcher, lid, pour tray and detachable filter cover (select models only) with mild, soapy water. Rinse well.

3- You hold filter under cold running tap water for 10 seconds. Allow excess to drain.

4-Attach detachable filter cover (select models only). Twist counterclockwise to lock.

5-Insert the filter into the pour tray and push down and twist clockwise to lock.

What can I do if the light on my pitcher is out?

If the light on your pitcher is out, grip the reset button down for at least 5 seconds.

What if the green light on my pitcher is not flashing after I pour?

1-Hold the reset button for 5 seconds and release when all 3 lights illuminate.

2-If normal reset does not work, then hold the reset button and continue pressing for 15 seconds until the green LED stops flashing & all the lights turn on.

3- And repeat reset by holding the reset button for 5 seconds and release when all 3 lights illuminate.

What can I do if the lid is falling off my pitcher when pouring?

Make sure the blue tank is inserted correctly. If backwards, rotate 180-degrees. Make sure there is no water in the top reservoir when pouring.

How to install or substitute a filter?

Supplement the filter into the pour tray and push down and screw clockwise to lock.

Must I immerse the filter before use?

Yes. Pitcher filters need to be saturated in cold water for 15 minutes and then held under cold running water for 10 seconds.

Can I run hot water through the filter?

Use cold water only. Does not use with water above 82°F/28°C as this may harm the filter? Do not use with water that is microbiologically unsafe, or of unknown quality, without passable disinfection before or after the system. Individuals’ needful water of a sure microbiological purity must consult their physician.

How can we install or substitute a filter?

Insert the filter into the pour tray and thrust down and twist clockwise to lock.

How do many contaminants does my filter reduce?

Pure clean water filter technology removes 96% of mercury, 95% of certain industrial contaminants and 94% of certain pharmaceuticals.

How does the Clean Sensor Monitor work?

The CleanSensor Monitor is an easy way to see when it is time to change your filter because it measures the amount of time the filter has been in your decanter. Be sure to reset your CleanSensor Monitor every time you substitute your filter.

Filter change light changes color depending on how long filter has been in use or how much water has been filtered. Filter would reach end of life at 40+ gallons or 60+ days.

The filter change light contains a non-substitutable battery. The battery would eventually stop working but the filter is still functional.

How can I clean my pitcher or dispenser?

Hand wash pitcher, lid, and pour tray and removable filter cover (select models only) with mild soapy water. Rinse well.

How can I know when to substitute the filter?

A fter 2 months or when the red light on your CleanSensor  Monitor is flashing, it is time to substitute your filter.

Related Posts

Water Dispenser

Under Counter Water Units

The under counter water units are the best solution for places where under counter spaces are limited. And in limited places you want top quality

Read More »

Leave a Reply

Your email address will not be published. Required fields are marked *

kitchen Chattel